DishDrawer F1 / F2 — Drain Sensor
DishDrawer trips F1/F2 when the drain sensor drifts. We replace and verify cycle.
Your Fisher & Paykel DishDrawer shows F1, the Active Smart fridge alarms, or the Smart Drive washer won’t spin. BJE Appliance Repair dispatches a precision New Zealand engineering crew the same day with OEM F&P parts and a 90-day repair warranty.
F&P engineers from New Zealand have a unique fault catalog — we know every code.
DishDrawer trips F1/F2 when the drain sensor drifts. We replace and verify cycle.
Active Smart fridges alarm when temp drifts. Common cause is condenser fan or gasket.
Smart Drive washers use a direct-drive motor. Failed Hall sensor or motor module. We test and replace.
Drawer fail to latch on close. Worn latch arm or strike. We replace.
CoolDrawer thermistor drifts. We replace and calibrate.
F&P column fridges use linear compressors. Inverter board failure. We test and replace.
Bake or convection element burnout. We test and replace.
Pan-detect coil or generator board failed. We isolate.
F&P is the New Zealand premium brand owned by Haier. Their direct-drive motors and DishDrawer system require brand-specific tools.
Click any tile below for the matching Atlanta service page with F&P-specific common faults and pricing.
Cooling failures, ice maker faults, water dispenser drips, control board errors.
Fisher & Paykel refrigerator Kiwi tune-up →Drain pump, door boot, control module, drum bearings, suspension rods.
Fisher & Paykel washer Kiwi tune-up →Heating element, thermal fuse, drum rollers, vent restriction, lint clogs.
Fisher & Paykel dryer Kiwi tune-up →Wash motor, drain pump, door latch, spray arm jets, electronic display board.
Fisher & Paykel dishwasher Kiwi tune-up →Bake element, igniter, sensor probe, control board, door hinges and gaskets.
Fisher & Paykel oven Kiwi tune-up →Surface element, induction coil, infinite switch, glass top, spark module.
Fisher & Paykel cooktop Kiwi tune-up →Blower motor, capacitor, halogen lamps, charcoal filter, touch panel.
Fisher & Paykel range hood Kiwi tune-up →Magnetron, diode, door switch, turntable motor, control panel and key matrix.
Fisher & Paykel microwave Kiwi tune-up →F&P parts run premium because the engineering is unique. Most repairs still fall in the four price bands.
On-site diagnosis, model lookup, and a written flat-rate quote. Fee is credited toward the repair.
Door switch, thermistor, fan motor, igniter, water valve, control knob, harness fix.
Control board reflash, drain pump, evaporator fan, motor coupling, dispenser overhaul.
Compressor, sealed system, drum bearings, magnetron, induction generator, oven element pack.
Inverter boards on column fridges are special-order. DishDrawer motors are stocked.
No surprise charges. No fishing for problems. Just a quick, factory-style Fisher & Paykel diagnostic and a written flat-rate price before any tools come out.
Tell us your Fisher & Paykel model number and what the appliance is doing. We pre-stage the most likely OEM parts before the truck rolls.
A factory-trained tech reads error codes, runs a forced-cycle test, and inspects every Fisher & Paykel-specific failure point on a printed checklist.
We hand you a written, all-inclusive price — parts plus labor. Nothing starts until you sign.
The fix is performed on-site, tested through a full cycle, and backed by a 90-day parts and labor warranty.
Real reviews from F&P owners across metro Atlanta’s most discerning kitchens.
Our F&P DishDrawer tripped F1. Tech replaced the drain sensor and ran a calibration. Cleans like new.
My Smart Drive top-loader from 2010 stopped spinning. They replaced a Hall sensor and the direct-drive motor module. Now spins quieter than ever.
We have an Active Smart fridge. It kept alarming. They replaced the gasket and cleaned the condenser. Quiet ever since.
Our CoolDrawer kept drifting. Tech replaced the thermistor and re-calibrated. Holds temp perfect.
F&P kitchens cluster in Atlanta’s remodel-class neighborhoods. We dispatch F&P-trained techs from our central warehouse.
The questions F&P owners across Atlanta call about most.
Almost always yes. DishDrawers cost $1,500-2,200 to replace. Repairs are typically under $400.
F1 is a drain sensor drift code. We replace and verify cycle.
Yes, through Haier’s U.S. parts network. Most parts arrive in 2-5 days. Common parts are stocked.
Yes. The direct-drive design eliminates belts and pulleys. We see fewer failures than any other top-loader.
Yes. Inverter boards, gaskets, and thermistors are common service items.
Most F&P repairs are 60 to 120 minutes on the same visit.
Yes. We use OEM parts and document the repair.
Our techs hold F&P factory training certificates and use brand-specific tools.
F&P plus other brands? Tap any brand below for the dedicated service page.
Atlanta’s F&P factory-trained team — direct-drive expertise, OEM parts, 90 days of warranty.
(678) 647-9315